SureTrack Community Fix: Flashing in the Outback

Real Fixes from ShopKey’s SureTrack® expert information resource are documented issues from actual shop repair orders and community discussions. Read on to see how SureTrack can help you correct issues that are not easily diagnosed using OEM information alone. SureTrack is currently available free with the purchase of a current Snap-on® diagnostic software version or in our ShopKey Pro product.


Automatic transmissions don’t like to be too hot or too cold. If they get overheated, they can be seriously damaged. SureTrack community member Tech12345 had a Subaru Outback in the shop where the automatic transmission temperature light was flashing. They found and repaired some damage to the transmission but the light continues to flash. They posed the question to the community, and with the help of fellow community member ericsautomotive and others, they were able to resolve the issue quickly.

The following Community Fix summarizes the interaction between members of the community that led to the solution.

Vehicle
2001 Subaru Outback 2.5L

Title
Automatic transmission temperature light flashing, repaired wiring.

Complaint
Customer complains that the automatic transmission temperature light is flashing.

Diagnostic Steps Performed/Parts Replaced
Road test vehicle. Automatic transmission temperature light is flashing constantly and there is delayed shifting. Soft code P0778 (2-4 brake pressure solenoid valve circuit) which transfers to a transmission code 76 (Brake duty solenoid). Ran through flow chart and dropped transmission pan, which was severely dented or had a jack used against it. Peened out the pan, and saw that the 2-4 duty solenoid was broken. Replaced the solenoid, and the temperature sensor, replaced the transmission fluid. Cleared codes, both PCM and TCM, and immediately on restart the A/T temp lamp flashes and does not stop. And then a soft code sets in PCM and TCM for same code. Is there a specific relearn procedure for the A/T lamp issue or am I overlooking something?

Best Answer from Community Member ericsautomotive
The brake duty solenoid is in the rear housing. Did you trace all the wires in the pan area? Maybe the one to the brake solenoid got pinched?

Cause
Although resistance tests showed good. I found that when the circuit was powered up that I had a significant voltage drop. Found damaged wiring.

Correction
Repaired wring to circuit and retested, all is good.


SureTrack® adds to the power of ShopKey Pro with an exclusive combination of expert knowledge and detailed parts replacement records, all wrapped in an interactive community. Designed to help automotive shops increase accuracy and efficiency from diagnosis to completed repair, the industry’s most comprehensive repair information resource is just a few clicks away.

Want more? Here’s how you can see more Real Fixes in SureTrack:

About the Author

Nick Taylor

Nick Taylor is the SureTrack Community Administrator and a Senior Applications Specialist at Mitchell 1 with over 25 years of experience with electronic repair data systems. Nick previously worked in the automotive dismantling and engine rebuilding industries.